Multiple threads are adding messages about the current
state of the views to the main looper. This can cause
onDetachedFromWindow to be posted on the looper before
onAttachedToWindow. This change will make sure to only
dispatch onDetachedFromWindow if we have previously
dispatched onAttachToWindow.
Change-Id: Ibc7cbcafb098bc000d2ef5480d2110d3fff4d55a
However, the whole method needs to be reviewed. It still has several
locking/unlocking places not tied together by try-finally construct,
but they cannot be fixed without deeper understanding.
Change-Id: Iaaf87568d585327654be409377b6d57a1da135eb
If the scaling factor is larger than 1.0 (i.e. 1.5),
then mTouchSlopSquare(576) is bigger than mBiggerTouchSlopSquare(400).
The double tap condition should be bigger than a single tap's one.
This causes the fail of the following CTS test cases in the device has
over 240 density.
- android.view.cts.GestureDetectorTest
* testOnTouchEvent
- android.view.cts.GestureDetector_SimpleOnGestureListenerTest
* testSimpleOnGestureListener
To fix this issue, I'll add a new public method
ViewConfiguration#getScaledLargeTouchSlop() then the value returned
from that method is used as a slop area of mLargeTouchSlop.
Change-Id: I0e61c13670e1300be1ccf45a89ef89410496fb48
Added check avoid a division by zero resulting in NaN which in turn
makes checkFullyTilted to ignore high tilt angles from then on.
If (x, y, z) == (0, 0, 0) then there is no tilt or rotation and
this vector must be ignored. This check is extended to ignore all
small acceleration values where noise can be of big influence.
Low or zero readings can happen when space travelling free falling,
but more commonly when shaking or getting bad readings from the sensor.
The accelerometer is turned off when not used and polling it too soon
after it is turned on may result in (0, 0, 0).
Change-Id: I19aec653abb8ab6f7126778035c8c96449f1326f
Added check avoid a division by zero resulting in NaN which in turn
makes checkFullyTilted to ignore high tilt angles from then on.
If (x, y, z) == (0, 0, 0) then there is no tilt or rotation and
this vector must be ignored. This check is extended to ignore all
small acceleration values where noise can be of big influence.
Low or zero readings can happen when space travelling free falling,
but more commonly when shaking or getting bad readings from the sensor.
The accelerometer is turned off when not used and polling it too soon
after it is turned on may result in (0, 0, 0).
Change-Id: I19aec653abb8ab6f7126778035c8c96449f1326f
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Bug: 3144874
Change-Id: Iebb91e10592b4ef2de4b1dd3a2e1e4254aacb697
* commit '05813b0eb92cb1bc79607ee402f14ca1e4b43f6d':
[3253328, 3171580] Treat GONE and INVISIBLE views the same when calculating transparent regions
[3171580] Fix two typos related to fixed-size buffers
request a layout when asking the transparent region to be recomputed, without this
it may never happen, since the transparent region is only calculated during layout.
this also fixes an issue where some fullscreen apps will run slower than expected
because their transparent region is never processed.
Change-Id: Iba187ef7b23f08ad3454aaa6707a3d262551e30c
Merge commit 'c1a564b108c511c0bdd699567c245b031930e718' into gingerbread-plus-aosp
* commit 'c1a564b108c511c0bdd699567c245b031930e718':
Add support for secure system overlays. (DO NOT MERGE)
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Merge commit '1da8d4d1697cec871dea8c30dad67e90db10bde6' into gingerbread-plus-aosp
* commit '1da8d4d1697cec871dea8c30dad67e90db10bde6':
Fix an event injection bug when the policy is bypassed.
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
Merge commit '1e6a3a53fc4d56e3a0f86c8721dedfd46e738a32' into gingerbread-plus-aosp
* commit '1e6a3a53fc4d56e3a0f86c8721dedfd46e738a32':
Added more robust tracking and cancelation of events.
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
Merge commit 'd00b4386aed2ef58077490ca7de7d93b98ed51fb' into gingerbread-plus-aosp
* commit 'd00b4386aed2ef58077490ca7de7d93b98ed51fb':
Clarify some comments on individual key codes.
Merge commit 'a2a0a98ac7ce53f282a9a4caac9d382a0eb01ef9' into gingerbread-plus-aosp
* commit 'a2a0a98ac7ce53f282a9a4caac9d382a0eb01ef9':
Fix NPE if there is no accelerometer.
Merge commit '59c4cb9e8fee03f770aa0fa1a2f0ec84ffb945b8' into gingerbread-plus-aosp
* commit '59c4cb9e8fee03f770aa0fa1a2f0ec84ffb945b8':
DO NOT MERGE Fix bug 3001751 and bug 3001584 - Gingerbread API review for over-scroll
Merge commit 'ef11530874f86570aa04a10c16a416b274b3fdf5' into gingerbread-plus-aosp
* commit 'ef11530874f86570aa04a10c16a416b274b3fdf5':
fix build. SurfaceView.setFrame needed to be hidden
The video has the same aspect ratio than the window, so the window size doesn't change.
In turn, onSizeChanged() is not called, which is where surfaceChanged() is eventually called from.
we now override setFrame() and always call updateWindow from there instead of from onSizeChanged()
Change-Id: I87064b577ff1d7b6ba50e563d7278813002d2b29
Merge commit '458fc5f52e25d7a8b4e482010711aed66f0b4999' into gingerbread-plus-aosp
* commit '458fc5f52e25d7a8b4e482010711aed66f0b4999':
Fix issue #3041660: Camera image flips upside down when rotating device
Apps now must explicitly opt in to having their rotation changed while
forcing landscape mode. Also add some new orientation constants for other
things apps may want to do.
Change-Id: If64d84b5ef54793ee717ebda9b4c76408efc9bfd
Merge commit '9e32a438fd87180692da55197972ecddb1a731d9' into gingerbread-plus-aosp
* commit '9e32a438fd87180692da55197972ecddb1a731d9':
Support haptic feedback for virtual keys defined in key layout.
