Add primary switch that updates the VIBRATE_ON user setting.
Update all settings in this page to be disabled when this main toggle is
off.
Bug: 30028435
Test: VibrationMainSwitchPreferenceControllerTest
Change-Id: I752ca3b914c46678a1347034c5b6cf24fd40cc13
Introduce toggles and sliders to configure the alarm and media
vibrations in the "Vibration & haptics" settings app.
Also update the multiple intensities configuration flag into a integer,
where the device can specify how many distinct levels are supported.
Follow existing implementation to map the intensities to higher setting
values.
Bug: 198346559
Bug: 207477604
Test: [Alarm|Media]Vibration[Intensity|Toggle]PreferenceControllerTest
Change-Id: Ie3d570b72ba1229e613ecf0c45fac81233529e32
* changes:
Remove FDE support from accessibility settings
Rename crypt_keeper_* strings that are still used
Remove CryptKeeperSettings
Remove CryptKeeper
- Extending the interface of AppGridView to be flexible. It will be used
in the TextReadingPreferenceFragment.
1. Add a new attribute "appCounts" into the view.
2. Default app counts as 6 if not set the attribute.
Bug: 211503117
Test: make -j64 RunSettingsRoboTests ROBOTEST_FILTER=AppGridViewTest
Change-Id: I94a5f1d037551f6faba0300a176feb11fba1f203
Updating the Settings app to allow setting the value off for key
HAPTIC_FEEDBACK_INTENSITY. This setting state is also copied onto
HAPTIC_FEEDBACK_ENABLED setting, so both should be in sync after this
change.
Similar logic is applied between RING_VIBRATION_INTENSITY and
VIBRATE_WHEN_RINGING.
This will not disable the hardware feedback since that one is controlled
by a separate setting key now.
The "vibrate for calls" was also removed and the single toggle for
"vibrate first then ring gradually" was moved into the "Vibration &
haptics" page.
Bug: 185351540
Test: [HapticFeedback|NotificationVibration|RingVibration][Intensity|Toggle]PreferenceControllerTest
and manual testing of the AOSP settings app
Change-Id: I9c94cef331a1500a1272a601ba32667ca995ddab
- Show the illustration and QS tile label text
- Dynamic update popup window width by content
- Support the auto close timer API
Bug: 210353709
Test: make RunSettingsRoboTests ROBOTEST_FILTER=AccessibilityQuickSettingsTooltipWindowTest
Change-Id: I8e0d3ff4ef6a48a54ef1e80724002d2cd28d7ac3
Test: Make sure behavior is correct as it was in
search flow, higlight flow, regular settings flow, split screen flow.
Bug: 204399167
Change-Id: I7fc29c8cdbfc6682963591f4ff805070bea4ca22
With FDE (Full Disk Encryption), secure start-up (i.e. requiring a PIN /
pattern / password to boot the device) was incompatible with
accessibility services. Thus, the accessibility settings would ask the
user to disable secure start-up when enabling an accessibility service.
Now that FDE support has been removed in favor of FBE (File Based
Encryption), this is no longer necessary. Remove it.
Bug: 208476087
Change-Id: I5f6e512f223df63e1b4d1c181fc8b3fe683dcd5f
Some strings used in the Settings UI have "crypt_keeper" in their names,
but they aren't specific to FDE, which is no longer supported. They are
still used to report the encrypted status of the device on devices that
use FBE, or the unencrypted status of the device on devices that don't
have encryption enabled at all. Rename these strings appropriately.
Test: On Cuttlefish with and without encryption enabled, tested visiting
the "Encryption & credentials" settings.
Bug: 208476087
Change-Id: Ic63910c870837f5b37e4407ba5b3c7629e925c17
FDE support has been removed in favor of FBE, so remove the FDE settings
from the "Encryption & credentials" page of the Settings app.
For now I didn't change the way the page appears on devices that don't
use FDE; as before, it still lists "Encrypt phone", followed by either
"Encrypted" or "Phone not encrypted" with no changeable settings. Note
that the strings used for this have "crypt_keeper" in their names but
aren't specific to FDE; the next CL will rename them.
Test: On Cuttlefish with and without encryption enabled, tested visiting
the "Encryption & credentials" settings.
Bug: 208476087
Change-Id: I3ce9894291ea1f1886f21980a86a92bfce38038a
Since Android 10, new devices have been required to use FBE (File Based
Encryption) instead of FDE (Full Disk Encryption). FDE support was
already removed from system components such as init and vold.
Therefore, the CryptKeeper activity is no longer needed. Remove it.
Note: this CL only removes CryptKeeper itself, i.e. the activity which
runs at boot time on devices that are using FDE or are being encrypted
with FDE in-place. Later CLs will remove FDE-specific code from the
Settings app.
Bug: 208476087
Change-Id: I4aaf795e8cee1ff3cdd55a41c975273c8faeefa9
This adds a config resource to specify whether restricted profiles
should be offered as an option when a new user is added. This replaces
the previous check if a device is voice capable, and will be defaulted
to false.
Bug: 202854971
Test: make RunSettingsRoboTests -j40 ROBOTEST_FILTER="com.android.settings.users.UserCapabilitiesTest"
Change-Id: If090fe8d902d6521acfde8c26e801aa4fc4f5ff4
based on the type of active Security Settings
Test: atest SettingsUnitTests:SecurityAdvancedSettingsTest
Bug: 206001340
Change-Id: I7bdac4b26653eedb45e3e2f056e6804a6c16cb18
Bug: 196180536
Test: * connect to a EAP-TLS network with TOFU option
* make RunSettingsRoboTests ROBOTEST_FILTER=WifiConfigController2Test
Change-Id: I30b55d835bd073d604bddd235f2425bdc8b647af
This is a no-op refactoring.
These functions are deprecated and replaced by
NetworkTemplate#Builder, use public API instead.
Test: make RunSettingsLibRoboTests
Bug: 204830222
Change-Id: Idc2a09d8e3789ca2c7a97691cfad4b2e2b417f0d
When UserManager.DISALLOW_ADD_WIFI_CONFIG is set to true.
- Disable the "Add network" item in the Internet settings.
- Activity action API for ACTION_WIFI_ADD_NETWORKS should not be
permitted and the user shouldn’t see a prompt for approval
Bug: 203169077
Test: make RunSettingsRoboTests ROBOTEST_FILTER=NetworkProviderSettingsTest
Test: make RunSettingsRoboTests ROBOTEST_FILTER=AddAppNetworksActivityTest
Change-Id: I18d7703b5972bfbc12dca10b6432d756813abace
Move some logic out of constructor to reduce the loading when launch UI.
Bug: 213836977
Test: Junit VpnPreferenceControllerTest
Change-Id: I90c7770f529b4710196697886e566dfe1be629e4
