In general the mobile network details page has several preference
controllers that don't listen to carrier config changes, so instead of
having each one add a listener, we instead just have one listener and
refresh the entire page when we see the broadcast.
Fixes: 135587885
Test: make RunSettingsRoboTests
Change-Id: Iff5b28dbfe12d94c901b442b23cece8e68218983
The last private DNS settings screen landed in P after string
freeze, which led us to reuse R.string.switch_on_text for the
"on" text when private DNS is active. That string comes from
notifications. Private DNS should have its own string for this
instead.
Bug: 79122154
Test: 1. Build pass
2. make -j44 RunSettingsRoboTests \
ROBOTEST_FILTER=PrivateDnsPreferenceControllerTest
Change-Id: Ie013a858c8bc41e00a1b940d02efa2b605991685
The launchMode for MobileNetworkActivity specified in the android
manifest is "singleTask", which means that when an intent to it is
launched, if there is an existing instance we will reuse that instead of
creating a new one. But to handle this properly we need to know when it
happens by implementing onNewIntent, which we weren't doing.
Implementing this fixes a bug we noticed that if you have multiple SIMs
and recently visit the details page for SIM 1 but then click on a SIM
selection notification that should bring you to the details for SIM 2,
we'd just bring up the details page for SIM 1 again.
Fixes: 133447239
Test: make RunSettingsRoboTests
Change-Id: Ia9106b15ffde437f6dd6fd2da23336ec5b28f75e
When active cellular internet is switched to CBRS in DSDS case,
default data sub id may not be changed. Fix by using active
subscription id and pass this sub id to entitlement app.
Bug: 134994718
Test: atest TetherServiceTest
Test: manual test with carrer SIMs.
Change-Id: I30a1d70c0690f0dba8f4171a2bde884f9b7ccfc4
As we don't allow pSIM modem disablment, we should simply use isActiveSubId
to decide whether a subscription's preferences is changable. This will
avoid potential modem bugs that reports wrong modem status that result
in Setting's UX error.
Bug: 135222940
Test: manual and robo
Change-Id: I7cccf2fdab7c89d26dac4daad51cd5d6f3a90eba
In cases where MobileData should not be changed:
- Airplane mode
- No data subscriptions
we will return a null slice, rather than a slice with a no-op intent
attached as a primary action. The problem with the no-op intent is that
Slices assumes all actions are by definition, actionable, and the the
TalkBack description announces that the item is clickable, which it
really isn't.
We will in the future investigate disabled actions on Slices, but this
is the short-term fix.
Fixes: 132924748
Test: Robolectric
Test: Panel tester app
Change-Id: I1d62af32fe2dd985f0b52ea4188651e76f9c90ec
In cases where a SIM is initially disabled, even after you turn it on
the ListPreference's for selecting the default SIM for Calls and SMS
weren't working because the preference change listener wasn't getting
registered. This CL fixes that for these controllers by always
registering a change listener whenever we make the preference visible.
Fixes: 134472294
Bug: 135142209
Test: make RunSettingsRoboTests
Change-Id: Ia9362b7f26309bdbd6c5e8140fb606b28e2b34d8
When intent is null, we will hide wifi calling preference however
its listener might still triggered with null intent.
This CL update controller so it can handle this event inside listener
callback.
Fixes: 135095929
Test: RunSettingsRoboTests
Change-Id: I4c5aba03871f11a2d9f9b4da329c2c2655ff9adb
Our original design for mobile network subscription management included
having an on/off toggle for both eSIMs and physical SIMs. However, it
turns out that our current telephony stack has some problems with
disabling physical SIMs, so for now we're removing the on/off
toggle. Because of this, we've added a footer to the SIM details page
for physical SIMS letting users know that to disable them you need to
remove them from the device.
Even though we're removing the on/off toggle for pSIMs, there are still
a few edge cases where you could end up with a disabled one (eg having
two SIMs in single-SIM mode where the eSIM is active and then you erased
the eSIM). In order to have a way to re-enable the pSIM in these cases,
this CL changes the relevant pref's summary to "Tap to activate <name>"
and makes the tap action begin the re-enabling. This can affect either
the Mobile network pref on the Network & internet main page (if this
disabled pSIM is the only SIM), or an entry in the Mobile networks list
page (if there are still multiple SIMs present).
Finally, this also fixes a problem where we weren't showing the on/off
toggle for eSIMs if you only had one SIM total; we actually always want
to show it for eSIMs.
Bug: 132921553
Test: make RunSettingsRoboTests
Change-Id: Id0750ebd5bed46dc2450b65b53cc81847ef09b82
This adds a switch which appears on the SIM details page for any SIMs
that aren't the default on for data. It lets the user opt-in to turning
on data on this SIM only in the case where there is an active call -
this is needed because in some cases the default data SIM may not be
able to be used when a call is active on another SIM.
Bug: 132114205
Test: make RunSettingsRoboTests
Change-Id: Ie44c56e0f486fd93aff411a0ba0e47d3695a4941
Second user or guest is limited some mobile network access. We need to check current user
is admin or not to decide the preferece page will be found in search or not.
Bug: 133466016
Fixes: 133466016
Test: Manual test & make RunSettingsRoboTests -j56 ROBOTEST_FILTER=com.android.settings.network
Change-Id: I48d3064a8aa28ac1f2ac699b42a999b9682b1b52
We initially landed support for erasing an eSIM subscription in
ag/7208624 for b/124254555 using our own confirmation/progress UI, and
calling the EuiccManager.deleteSubscription method to do the
deletion. It turns out this is a low-level API which doesn't handle some
important cases such as subscription grouping or the eSIM slot not being
active.
This CL changes Settings to just launch an intent to begin an eSIM
Manager flow to delete a subscription that provides its own
confirmation/progress UI, and should properly handle subscription
grouping and making the eSIM slot active as needed.
Bug: 132114333
Test: make RunSettingsRoboTests
Change-Id: Ie59fea37fa73c5e6573e1181e271ffb5d453bd08
When a device is in DSDS mode with multiple SIMs, we show a header on
the Network & internet page with a "connectivity overview", with an
entry for Wi-Fi (if connected) and each active SIM. The icon for Wi-Fi
shows signal strength, but the icons for the active SIMs were just
static; this CL fixes that. It introduces a class for listening to
signal strength changes on a set of subscriptions, and moves some
existing code we had for displaying signal strength (when manually
picking networks for GSM) in NetworkOperatorPreference into a utility
method that can be shared.
Bug: 128855095
Test: make RunSettingsRoboTests
Change-Id: I668cafe1e9f9c3651b1f33783c8538ad9c2732b5
For GSM networks, the "Choose network" page allows you to manually pick
from among different cell networks, and shows signal strength and
network type (LTE, 3g, etc.) for available ones. The signal strength
wedges were transparent and not visible to the user - this CL fixes
that.
Bug: 132895135
Test: visual (Insert SIM with GSM service, then go to Settings ->
Network & internet -> Mobile network -> Advanced -> Automatically select
network)
Change-Id: Ibbbc60b590b09e4b4f5e31b49fe578769dcdbc4d
