1. Removed the updatePrinters API on PrinterDiscoverySession.
Now re-adding a printer updates it.
2. Added getTrackedPrinters() API to allow a print service to
figure out which printers' state should be tracked by the
service.
3. Removed the APIs on PrintDocumentInfo that describe the
layout of the content as they are not needed. For example,
if the print attributes passed in layout require landscape
mode, the the app should just create a PDF page with the
wider side up and draw its content in portrait. The printer
will then rotate the page.
Change-Id: Idd72c6e9c129e8b17eef1236573a99773f8ff0a2
1. Fused printers loader was not using the discovered printers to update the
historical ones. Now if a historical printer is discovered we update its state
with the discovered, i.e. most recent, information.
2. Fixed a bug in the destination adapter of the print job config dialog that
was leading to a crash if all printers item is selected when there are no
discovered printers.
3. Updated the add printers asset in the all printers screen.
4. Historical printers were not persisted by the print dialog activity.
5. Reduced the number of printers we send per transation to avoid the binder
transaction size limit. Added sending of printers in chunks in a place
this was missing.
Change-Id: I88b54888360bc0e53b06bd260c2b832d0d6454b6
The system was overriding the user on every boot by turing of all system
print services, i.e. service that are on the system image. Now the system
print service are enabled by default only once per user, the user can later
disable them and the system does not override that. We now have a system
setting with the services we enabled once by default so we never do
default enabling again (unless device is wiped).
bug:10594775
Change-Id: Id3129ccfba95bf57375ea9fec0b5ca0e51bda199
1. Updated the security mode of the print spooler. Now the spooler
is not signed with the system key, it is not a privileged app so if
it gets compromised (PDF rendering is a potential attack vector)
it cannot access dangerous permissions. Also only the system
can bind to the spooler.
2. Added APIs for asking a print service to start and stop tracking
a given printer. This is need for the case when the user selects
the printer and the print service should do a best effort to keep
the system updated for the current state of the printer.
3. Added APIs for putting a print job in a blocked state. A print
service would report the print job as blocked if for some reason
the printer cannot proceed, e.g. 99 pages are printed but there
is no paper for the last one. The user has to add more paper
and the print service can resume the job.
4. Changed the read/write APIs to use ParcelFileDescriptor instead
of FileDescriptor since the latter does not have a clean API for
detaching the wrapped Linux file descriptor when one wants to
push it to native.
5. Added API for getting the size of the printed document so the
print service can avoid handling big filed over cellular network
or ask the user if needed.
6. Now the print services that are preinstalled on the system image
are automatically enabled.
Change-Id: Ia06c311d3d21cabb9e1368f13928e11cd0030918
1. Added support for selecting a printer from the all printers activity
that is not in the initial printer selection drop down. The user
initially sees a sub set of the printers in the drop down and the
last option is to see all printers in a separate activity. Some
of the printers in the all printers activity are not shown in the
initial drop down.
2. Refactored printer discovery by adding (private for now) printer
discovery app facing APIs. These APIs are needed to support multiple
printer selection activities (print dialog and all printers activities)
and also the settings for showing all printers for a service.
Now multiple apps can request observing for printers and there is
a centralized mediator that ensures the same printer discovery
session is used. The mediator dispatches printer discovery specific
requests to print services. It also aggregates discovered printers
and delivers them to the interested apps. The mediator minimizes
printer discovery session creation and starting and stopping discovery
by sharing the same discovery session and discovery window with
multiple apps. Lastly, the mediator takes care of print services
enabled during discovery by bringing them up to the current
discovery state (create discovery session and start discovery if
needed). The mediator also reports disappearing of the printers
of a service removed during discovery and notifies a newly
registered observers for the currnet printers if the observers are
added during an active printer discovery session.
3. Fixed bugs in the print UI and implemented some UX tweaks.
Change-Id: I4d0b0c5a6c6f1809b2ba5dbc8e9d63ab3d48f1ef
1. Added past printer history tracking and merging favorite printers
with discovered printers.
2. Added save as PDF support.
3. Added all printers activity with search capability and optional
add printers chooser (if any print service provides add printers
activity)
4. Refactored the printer discovery session APIs. Now one session
can have multiple window discovery windows and the session stores
the printers found during past discovery periods.
5. Merged the print spooler and the print spooler service - much
simpler and easier to maintain.
Change-Id: I4830b0eb6367e1c748b768a5ea9ea11baf36cfad
1. Factored out the printer discovery APIs of a print service in a
dedicated session object that is created by the print service on
demand. This ensures that added/removed/updated printers from
one session do not interfere with another session.
2. Updated the app facing APIs to pass in a document info along
with a printed file. Also exposed the print file adapter so
apps that create a temporary file for printing can intercept
when it is read by the system so the file can be deleted.
3. Updated the print service documentation.
Change-Id: I3473d586c26d8bda1cf7e2bdacb441aa9df982ed
1. The singleton print spooler isntance is created when the print spooler
service gets a connection to the system and is destroyed when this
connection is removed. Note that if the spooler has work, then the
connection to the system will not be removed.
When the spooler is created, it reads the stored state and notifies the
system which in turn dispatches this to the print services.
When the system connects to the spooler and passes it a connection, we
schedule a delayed check whether there is work for the spooler. We do
not handle this immediately to avoid intermitted spinning on and off
of the spooler process if a client makes a sequence of queries while
the spooler has really no work.
2. Fixed a bug in the NotificationManagerService where adding a notification
and removing it immediately after that does not remove the notification.
The code that is adding a notification is run on a handler thread while
the code to remove it on the calling thread. This creates a race and
erroneous results. Now the removal is also scheduled on the handler.
3. Many small fixes here and there.
Change-Id: I6415c253139fa6616393fbe23c659d031a29e1f6
1. Added notifications for a queued print job, for a started print job,
for ongoing canceling a print job, and for a failed print job. The
notifications for queued and started state have a cancel action. The
notification for failed print job has a cancel and a restart action.
2. Propagating failure message from the print service to the notifications.
3. PrintJobConfigActivity was not setting the initial value for the
print job copies and was not updating the UI immediately after creation.
4. Refactored PrintJobConfigActivity to avoid using the hack to avoid
reaction for item selection change in a spinner for an event that
happened before the callback was registered.
5. Removed the label attribute from PrinterInfo and now PrinterId is
composed of the printer name and the service component name. This
is nice since for restarting print jobs we do not need to store
information about the printer except the printer id which is
already part of the PrintJobInfo's data. Also the printer name
is not expected to change anyway.
6. Allowing cancellation of a queued print job. Also no print job is
cancelled without asking the managing print service to do that.
Before we were immediately canceling print jobs in queued state
but it was possible for a buggy print service to not set the
print job state to started before starting to do expensive work
that will not be canceled.
7. PrintServiceInfo was throwing an exception the the meta-data
XML for the print service was not well-formed which would crash
the system process. Now we just ignore not well-formed meta-data.
8. Removed unused permissions from the PrintSpooler's manifest.
Change-Id: Iba2dd14b487f56e137b90d1da17c3033422ab5e6
1. Added APIs for adding partially initialized PrintInfo objects
enabling light-weight lookps for print serivces that want to
populate the list of available printers without querying each
of them for its capabilities. This includes APIs for the system
to request from a print service to update certain printers.
2. Fixed a bug in PrinterId#equals().
3. Added equals and hasCode implementaion to PrinterInfo. Also
the defaul in PrinterInfo are now an array instead of a
SparseArray - cheaper.
4. Now PrintJobConfigActivity works with partially specified
printers. Specifically, if such a printer is selected the
activity is requesting from the print service to update
the printer. We are currently not handling the timeout case.
It also handles udpated pritners.
Change-Id: I5e83e924ef597c9e22cbd06a971d4f4d3bd3a9c1
1. Now a user state has ins own spooler since the spooler app is
running per user. The user state registers an observer for the state
of the spooler to get information needed to orchestrate unbinding
from print serivces that have no work and eventually unbinding from
the spooler when all no service has any work.
2. Abstracted a remote print service from the perspective of the system
in a class that is transparently managing binding and unbinding to
the remote instance.
3. Abstracted the remote print spooler to transparently manage binding
and unbinding to the remote instance when there is work and when
there is no work, respectively.
4. Cleaned up the print document adapter (ex-PrintAdapter) APIs to
enable implementing the all callbacks on a thread of choice. If
the document is really small, using the main thread makes sense.
Now if an app that does not need the UI state to layout the printed
content, it can schedule all the work for allocating resources, laying
out, writing, and releasing resources on a dedicated thread.
5. Added info class for the printed document that is now propagated
the the print services. A print service gets an instance of a
new document class that encapsulates the document info and a method
to access the document's data.
6. Added APIs for describing the type of a document to the new document
info class. This allows a print service to do smarts based on the
doc type. For now we have only photo and document types.
7. Renamed the systemReady method for system services that implement
it with different semantics to systemRunning. Such methods assume
the the service can run third-party code which is not the same as
systemReady.
8. Cleaned up the print job configuration activity.
9. Sigh... code clean up here and there. Factoring out classes to
improve readability.
Change-Id: I637ba28412793166cbf519273fdf022241159a92
