Added check avoid a division by zero resulting in NaN which in turn
makes checkFullyTilted to ignore high tilt angles from then on.
If (x, y, z) == (0, 0, 0) then there is no tilt or rotation and
this vector must be ignored. This check is extended to ignore all
small acceleration values where noise can be of big influence.
Low or zero readings can happen when space travelling free falling,
but more commonly when shaking or getting bad readings from the sensor.
The accelerometer is turned off when not used and polling it too soon
after it is turned on may result in (0, 0, 0).
Change-Id: I19aec653abb8ab6f7126778035c8c96449f1326f
Rewrote interceptKeyBeforeQueueing to make the handling more systematic.
Behavior should be identical except:
- We never pass keys to applications when the screen is off and the keyguard
is not showing (the proximity sensor turned off the screen).
Previously we passed all non-wake keys through in this case which
caused a bug on Crespo where the screen would come back on if a soft key
was held at the time of power off because the resulting key up event
would sneak in just before the keyguard was shown. It would then be
passed through to the dispatcher which would poke user activity and
wake up the screen.
- We propagate the key flags when broadcasting media keys which
ensures that recipients can tell when the key is canceled.
- We ignore endcall or power if canceled (shouldn't happen anyways).
Changed the input dispatcher to not poke user activity for canceled
events since they are synthetic and should not wake the device.
Changed the lock screen so that it does not poke the wake lock when the
grab handle is released. This fixes a bug where the screen would come
back on immediately if the power went off while the user was holding
one of the grab handles because the sliding tab would receive an up
event after screen turned off and release the grab handles.
Bug: 3144874
Change-Id: Iebb91e10592b4ef2de4b1dd3a2e1e4254aacb697
request a layout when asking the transparent region to be recomputed, without this
it may never happen, since the transparent region is only calculated during layout.
this also fixes an issue where some fullscreen apps will run slower than expected
because their transparent region is never processed.
Change-Id: Iba187ef7b23f08ad3454aaa6707a3d262551e30c
This change adds a new window type for secure system overlays
created by the system itself from non-secure system overlays that
might be created by applications that have the system alert permission.
Secure views ignore the presence of secure system overlays.
Bug: 3098519
Change-Id: I8f8398f4fdeb0469e5d71124c21bedf121bd8c07
Added the concept of a "trusted" event to distinguish between events from
attached input devices or trusted injectors vs. other applications.
This change enables us to move certain policy decisions out of the
dispatcher and into the policy itself where they can be handled more
systematically.
Change-Id: I4d56fdcdd31aaa675d452088af39a70c4e039970
This change fixes several issues where events would be dropped in the
input dispatch pipeline in such a way that the dispatcher could not
accurately track the state of the input device.
Given more robust tracking, we can now also provide robust cancelation
of input events in cases where an application might otherwise become
out of sync with the event stream due to ANR, app switch, policy decisions,
or forced focus transitions.
Pruned some of the input dispatcher log output.
Moved the responsibility for calling intercept*BeforeQueueing into
the input dispatcher instead of the input reader and added support for
early interception of injected events for events coming from trusted
sources. This enables behaviors like injection of media keys while
the screen is off, haptic feedback of injected virtual keys, so injected
events become more "first class" in a way.
Change-Id: Iec6ff1dd21e5f3c7feb80ea4feb5382bd090dbd9
The video has the same aspect ratio than the window, so the window size doesn't change.
In turn, onSizeChanged() is not called, which is where surfaceChanged() is eventually called from.
we now override setFrame() and always call updateWindow from there instead of from onSizeChanged()
Change-Id: I87064b577ff1d7b6ba50e563d7278813002d2b29
Apps now must explicitly opt in to having their rotation changed while
forcing landscape mode. Also add some new orientation constants for other
things apps may want to do.
Change-Id: If64d84b5ef54793ee717ebda9b4c76408efc9bfd
This feature is currently used to enable dragging the start and end
selection handles of a TextView at the same time. Could be used for
other things later.
Deleted some dead code in ArrowKeyMovementMethod and CursorControllers.
Change-Id: I930accd97ca1ca1917aab8a807db2c950fc7b409
- New feature to "am monitor" to have it automatically launch
gdbserv for you when a crash/ANR happens, and tell you how to
run the client.
- Update dumpstate to match new location of binder debug logs
- Various commented out logs that are being used to track down
issues.
Change-Id: Ia5dd0cd2df983a1fc6be697642a4590aa02a26a5
This change modifies ViewRoot to wait until the MotionEvent has been
delivered before telling the input dispatcher that it is finished.
The serial ordering guarantee will be required by new features that
may need to transfer touch focus from one window to another.
Change-Id: I0a64d1f0c8bc3f08846f213d6e28ce48b1d48e58
I've noticed over the past couple weeks that my phone was flipping to
landscape when I placed it down too often, more like it did in Eclair.
I think my previous changes to make orientation changes quicker were a
bit too aggressive, so I'm backing off a couple of the time constants.
Change-Id: Ifffd45ac934984cc9091da56958bc2b6bcaa280a
Overlays let views draw and respond to touch events outside of their
bounds. This allows selection anchors to be friendlier and easier to
grab. This is currently private API, pending further evaluation.
Added themes/styles for text selection anchors.
Added assets for text selection anchors as provided by UX. The
left/right anchors are currently not suitable for use. They are here
for bookkeeping and replacement later. The theme currently uses the
'middle' anchor asset for all three. This will be changed once assets
are ready.
Change-Id: I01b21e5ae90cab201f86f38f2f5eeaf2bd7f6bcd
Added the MotionEvent.FLAG_WINDOW_IS_OBSCURED flag which is set by the
input manager whenever another visible window is partly or wholly obscured
the target of a touch event so that applications can filter touches
accordingly.
Added a "filterTouchesWhenObscured" attribute to View which can be used to
enable filtering of touches when the view's window is obscured.
Change-Id: I936d9c85013fd2d77fb296a600528d30a29027d2
TODO: Currently disabled for WebView. Assets used for the glow effect
need to be themable/styleable. Overscroll effect should take place
even when the user did not grab the widget within actual content.
Change-Id: I68277d14d37dc5bcdb9254eaddf6e4998b3f2bf4
Finished the input device capability API.
Added a mechanism for calibrating touch devices to obtain more
accurate information about the touch contact area.
Improved pointer location to show new coordinates and capabilities.
Optimized pointer location display and formatting to avoid allocating large
numbers of temporary objects. The GC churn was causing the application to
stutter very badly when more than a couple of fingers were down).
Added more diagnostics.
Change-Id: Ie25380278ed6f16c5b04cd9df848015850383498
to return the selected text.
setComposingRegion:
The TextView may choose to highlight the text in some way (underline for now) to indicate
that the text is selected for correction, if the IME wants to provider alternatives.
Choosing an alternative in the IME can then call IC.commitText() to replace the highlighted
(not selected) text with a different candidate.
This change also ensures that any existing spans/styles are not wiped out. So we can now
correct rich text as well.
getSelectedText:
This is a convenience to get the selected text instead of using extracted text that is
more heavy weight. Existing getTextBeforeCursor() and getTextAfterCursor() fail to
retrieve the selected text, only what's before and after the selection.
Change-Id: Ieb5ecd5ff947ea04958589f501e7bd5228e00fb5
