Changes the PacManager to report message back to ConnectivityService
to send a broadcast once the download has completed. This allows the
ConnectivityService to store the correct proxy info for getProxy().
This made the problem arise that ProxyProperties was not handling port
while it had PAC. Added small fix for equals() and parcelization.
The combination of these fixes seems to resolve Bug: 11028616.
Bug: 11168706
Change-Id: I92d1343a8e804391ab77596b8167a2ef8d76b378
There are two bugs one is I was clearing the notification in
CaptivePortalTracker when entering the ActivateState. (double check
according to bug 5021626 we should be calling enter)
Second is we could have the need to display both icons but can't
because we only allow one.
The solution I'm proposing here is to allow two notifications and
have then controlled separately.
Bug: 10886908
Change-Id: I30e7130bc542535492d175640a4990c592f32806
Previously I was calling setIsConnectedToProvisioningNetwork(false) always,
but all MDST's receive every broadcast. Thus we could over write an MDST's
mNetworkInfo.mIsConnectedToProvisioningNetwork to false, unless the MDST
that was set to true was last, i.e the code was order dependent.
If the provisioning networks value was false instead of true
when handleMobileProvisioningAction was called we wouldn't invoke
mdst.enableMobileProvisioning because network info would be null.
Thus the provisioning network would never transition to CONNECTED and
a default route wouldn't get setup and the browser couldn't access the
website.
Now setIsConnectedToProvisioningNetwork is only set to false when the
apnType matches and we won't indiscriminately change it and are not
order dependent.
Bug: 10853805
Change-Id: I68a4f9bdf5dc18d90f4cdef7a60811f57be67261
This changes the PAC support to not broadcast the Proxy information until
the Local Proxy has started up and successfully bound to a port so that
the local proxy information can be guaranteed to be owned by the proxy.
Bug: 10459877
Change-Id: I175cd3388c758c55e341115e4a8241884b90d633
netd now tracks statistics for tethered interfaces across tethering
sessions, so switch to asking for all tethering stats. (Currently
we're double-counting all tethering data, ever since it started
tracking across sessions.)
Also catch OOME to handle corrupt stats files, which we then dump to
DropBox and then start over.
Bug: 5868832, 9796109
Change-Id: I2eb2a1bf01b993dd198597d770fe0e022466c6b9
Added a hidden API under ConnectivityManager to toggle airplane mode.
This may be a temp solution for b/10653570.
bug:10653570
Change-Id: I0b2b42230073289eb8dc6891317d62b84e26c133
Able to config network specific MTU size. Normally, the default size of MTU is 1500.
US - ATT 1410, TMUS 1440, SPRINT 1422
KR - SKT 1440, KT 1450, LGU+ 1428
JP - KDDI 1420, SoftBank 1340
CA - RGS 1430, FIDO 1430, MTS 1430, BELL 1358, SaskTel 1358
AU - TEL 1400
Bug: 10195070
Change-Id: Ie18650b37a3d44af944f2dae4aa97c04fb12cd5e
I'd changed DetailedState to force ConnectivityService to treat
provisioning apn's specially. In particular so that they wouldn't
be identified they were fully connected until the provisioning
actually started. The problem is that DetailedState is a public enum
that has a CTS test and just changing the CTS to allow for the new
state (CONNECTED_TO_PROVISIONING_NETWORK) was inappropriate.
Instead I've added a new mIsConnectedToProvisioningNetwork variable
and used the DetailedState.SUSPENDED as the intermediate state.
Bug: 10620248
Change-Id: Id4a842398cad67455541ce629959351c27d83639
This change renames the LinkInfo objects to LinkQuailtyInfo. The API is
still hidden; but it can be accessed via reflection.
Bug: 10342372
Change-Id: Ieccea87c467ceae5d7f76298b137573f67396cd6
Bad merge from jb-mr2 to klp, the SocketTimeoutException
in isCaptivePortal should not be present. Also add debug
for bug 9972012. The SocketTimeoutException is a possible
cause of 9972012 but the logs from post #24 it was not
caused by a timeout, so this is not a fix.
Bug: 9972012
Change-Id: I290518832f8258d4682821815834f5621245b643
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
Integer doesn't seem to like number > 2 Gig; so converting all bits of
samples to long; and handling exceptions that may crash the service
Bug: 10459447
Change-Id: I1291e97ba6d0ab7304dc6a6e8ef819d17491e017
This change starts tracking traffic quality data for WiFi and mobile
networks. The quality is tracked based on incidental traffic, and not
on specific measurements. Theoretical bandwidths are hard-coded, as
well as sampling interval; although sampling interval can be changed
by setting a system policy.
Bugs filed to remove shortcomings of this change -
10342372 Change LinkInfo name to something better
10342318 Move hardcoded values of MobileLinkInfo to resources
so they can be updated without changing code
Bug: 10006249
Change-Id: I83d8c7594da20fe53abbd5e1f909b1f606b035bb
This switches the PacProcessor over to an Android Service. The service
is bound and unbound by the PacManager, which also adds it to the
ServiceManager, allowing for Context-Free access by the PacProxySelector
in all DVMs.
bug:10182711
Change-Id: Id1ff7660be56e8976cdcccd76e041feb47a17a61
1. Add addressUpdated and addressRemoved methods to
INetworkManagementEventObserver. (The -Updated method is not
called -Added because it gets called for both adds and
changes.) Update all its callers in the tree.
2. Make NetworkManagementService parse IP address notifications
from NetlinkHandler and call the address{Removed,Updated} on
its observers.
Bug: 10232006
Change-Id: Ieb185dbba052bdbff03caafc0cf5397a7f04dc6d
Currently BaseNetworkObserver is in frameworks/base/services, but
there is code in frameworks/base/core that could use it. This
code typically extends INetworkManagementEventObserver.stub
because BaseNetworkObserver is not available.
Move BaseNetworkObserver to frameworks/base/core without changing
its package name, and use it to simplify two callers. The third
caller, Tethering, is much larger, and I'm not sure it's
appropriate to change it.
Bug: 10232006
Change-Id: Ifc0f2e619e3424e27e35730c048a1cc523df345e
1. Make addLinkAddress a no-op if the address already exists.
2. Make addLinkAddress, addStackedLink and removeStackedLink
return a boolean indicating whether something changed.
3. Add a removeLinkAddress method (currently there is no way of
removing an address).
3. Move hasIPv6Address from ConnectivityService to
LinkProperties, where it belongs.
Bug: 9625448
Bug: 10232006
Change-Id: If641d0198432a7a505e358c059171f25bc9f13d5
When the system becomes loaded the PhoneApp can be delayed
significantly and a call to setEnableFailFastMobileData may not
occur because the channel between the MobileDataStateTracker (MDST)
and DcTracker (DCT) is not connected.
Solution: Add a isReady to MDST and isMobileDataStateTrackerReady to
ConnectivityService and call it from isMobileOk.
Bug: 10351868
Change-Id: I92f9d58121b88186b636cd71c2fd2ef9a28f7cf6
Instead of local instance of the default HostnameVerifier, use it
directly from HttpsURLConnection. This avoids class preloading creating
an instance of it before it's necessary.
(cherry picked from commit 928ee1e48f)
Bug: 9984058
Change-Id: I79d8a934bfc390e4cd503fd592e21bc4e5446a7d
PAC (Proxy auto-config) files contain a single javascript function,
FindProxyForURL(url, host). It gets called to determine what proxy should be
used for a specific request.
This adds PAC support to the system. The ProxyProperties has been modified
to hold the PAC file when one is present. The Proxy method
setHttpProxySystemProperty has been modified to insert a PacProxySelector
as the default ProxySelector when it is required. This new ProxySelector
makes calls to the ConnectivityService to parse the PAC file.
The ConnectivityService and the WifiConfigStore have been modified to support
saving the extra PAC file data.
The ConnectivityService now has a class attached (PacProxyNative) that
interfaces to the native calls for PAC files. The parsing of the PAC file
is handled by libpac (which is being added to external/) which utilizes
libv8 to parse the javascript.
As a fallback to applications that don't use the java ProxySelector, the proxy
is setup to point to a local proxy server that will handle the pac parsing.
bug:10182711
Change-Id: I5eb8df893c632fd3e1b732385cb7720ad646f401
