This CL should fix application startup regression for Vulkan
detected by "Hermetic Startup: EmptyActivity" test.
EGL drivers are loaded in a temp thread to leave more time
in RenderThread for other work. Loading EGL drivers
on the RenderThread may cause a perf regression.
Test: Ran cold-dropcache-test test.
Bug: 122659224
Bug: 123361175
Change-Id: I8ca818e98fac196a41d079be15594caca5cb1bab
Handle many simple, smaller changes in a single CL. Hide
CPC.closeQuietly(), now that it implements AutoCloseable. Add more
details to CR.set/getCache() docs. Add many @Nullable/@NonNull
annotations.
Bug: 124507578, 124447751, 124302519, 123697622
Bug: 123661322, 122887179, 122528742, 122527812, 116224797
Test: manual
Change-Id: Icee556a6ed76bbdf4c8e42b59d69d5580d461b95
Add missing getStorageVolume() method to provide mapping from Uri
to underlying StorageVolume.
Bug: 124013019
Test: atest cts/tests/tests/provider/src/android/provider/cts/MediaStore*
Change-Id: I91e246d29629eec84956ff113ef976e153fc69f7
This patch adds the following properties to DeviceConfig:
* BLASTULA_POOL_ENABLED
* BLASTULA_POOL_SIZE_MAX
* BLASTULA_POOL_SIZE_MIN
* BLASTULA_POOL_REFILL_THERSHOLD
The BLASTULA_POOL_ENABLED property is checked by ZygoteProcess but not
currently used due to an existing bug (b/123409530). This will be
enabled by go/ag/6162164. Until then the code path is tested via log
inspection.
The remaining properties are checked by ZygoteServer. Values are
clamped to ensure that they cannot be set to values that are harmful to
the device.
Since device_config is not available in the Zygote the system properties
interface is used instead.
Bug: 123524494
Bug: 68253328
Test: adb shell device_config put runtime_native blastula_pool_enabled true
Test: manually verify the property change is observed
Change-Id: I2b675afd9fbc1cbb0e8bc1c491cfdbbb612d0d3b
Get the driver build date info from read-only system property
ro.gfx.driver.build_date for apps using system built-in driver, while
getting the Game Driver build date info from the apk's meta-data.
Bug: 123156461
Test: Build, flash and boot. Verify the GpuService receiver side.
Change-Id: Ie4acb658c9b1776179e2bb72d0b434dcf0a9a856
Add a hidden system API (protected by DEVICE_POWER) that forces suspend,
ignoring any existing wakelock. Add a shell cmd to trigger the API
to run.
Bug: 111991113
Test: 'adb shell svc power forcesuspend'
Change-Id: I5a258e1b7c8b1391fe1baf3930dd9d9af47235c9
Allow a '*' at the beginning of the whitelist file to mean whitelist
everything.
BUG: 120869311
Test: Build, flash and boot. Verify with apk
Change-Id: Ia1b772f545a04acb7f5b4ccbe5489e43ecddb9d2
This reverts commit 67773e8b87. Below is the
original commit message:
Instead of re-processing blacklists proto everytime, we move the processing to
GPU Service, and add SettingsObserver to observe the change of
Settings.Global.GAME_DRIVER_BLACKLISTS such that we only re-process the
blacklists when needed.
As a result, we will have GAME_DRIVER_BLACKLISTS which is used to accept a list
of blacklist from the server, one for each game driver version that needs to
have blacklist, and GAME_DRIVER_BLACKLIST will only contain a list of
blacklisted application package names for the current version of game driver on
the device, separated by comma.
BUG: 120869311
Test: Build, flash and boot. Use adb shell settings put command to verify.
Change-Id: I3a82d1cc020640f7b595def67b280dbc2d3a3155
Frameworks Base section of power monitor addition. Since IPowerStats
does not have a java interface, we needed to make a native interface
into the code. I followed how the LowPowerStats collection is being
done.
Native code is located in
com_android_server_am_BatteryStatsService.cpp. We are calling the
getEnergyData to get all rails energy data that has been collecting from
boot. This energy data is collected in uWs (microWatt seconds). After
the rail data is collected at each update in the RailStats class, the
wifi and cellular total energy values will contain the energy that all
rails associated with the specific subsystem will have.
We update and collect the energy data using battery stats and propagate
it to telephony metrics. When we collect the total energy for an update
we need to zero out the energy data so it can be accumulated correctly.
1/31: Added modemRailEnergy and wifiRailEnergy to Volta historian.
Bug: 115929961
Test: adb shell dumpsys activity service TelephonyDebugService --metrics
Results Examples:
Energy consumed by modem (mAh): 2.41
Energy Rails consumed by modem (mAh): 2.76
Dumpsys historian results:
+4m23s712ms (2) 100 cc511a18 modemRailChargemAh=0.34 wifiRailChargemAh=1.17 +wifi_scan stats=0:"dump"
+10m24s089ms (2) 100 c4511a18 modemRailChargemAh=0.71 wifiRailChargemAh=1.77 stats=0:"write"
+11m24s228ms (3) 100 c4511a19 volt=4315 charge=3988 modemRailChargemAh=0.77 wifiRailChargemAh=1.94 wifi_signal_strength=2 stats=0:"battery-state"
Change-Id: I97521a03204968079e61f3de86640d4f1a580255
This api is to log BinaryPushStateChanged.
Experiment id is added as a binary blob that is not expected to be
accessed on device side.
This cl is mainly for API.
Will add follow up cls for persisting train info on disk and make puller
for it.
Will address sepolicy in follow up cls.
Bug: 119633962
Bug: 119685453
Test: will add gts
Change-Id: I68b4246cf7e8079155e16121ca37a312b35a5328
This is an AOSP carry over for the frameworks base CL. This change is needed here to allow telephony changes to be added to AOSP with no issues.
Adding monitored power rail as a new cellular battery stats component. This will be used to better determine actual power usage of the modem rather than relying on battery reduction rates.
If the device does not support rail power monitoring then this value
will always remain at 0.
Test: adb shell dumpsys activity service TelephonyDebugService --metrics
Results Examples:
Energy consumed by modem (mAh): 2.41
Change-Id: If85af2f2e1b255661e189c5375ecc5825be84c58
Statsd now sends active configs changed broadcasts when needed per uid.
Also made an adb command to help debug.
More gts tests and unit tests required, will follow.
Test: GTS in topic
Bug: 123372077
Change-Id: Ib079018ded85d002581ffc2ba1240138ce7a54e7
More information will be useful to investigate unintentional wipe
for users. Added timestamp information into reason text.
Bug: 120586954
Change-Id: I26dd4eff815d736bf34e944be6843cbb80515ca9
Remove the queue, reduce core pool size but no longer let it time out.
Reduce the timeout for additional threads.
If necessary, use a special executor, with an unbounded queue, to run
overflow tasks.
Bug: 123762797
Test: AOSP boots, also with MAXIMUM_POOL_SIZE = 1.
Change-Id: I4bc9593a044d1773ff1878684e2397a7c2a9a87a
Instead of re-process blacklists proto everytime, we move the processing to GPU
Service, and add SettingsObserver to observe the change of
Settings.Global.GAME_DRIVER_BLACKLISTS such that we only re-process the
blacklists when needed.
As a result, we will have GAME_DRIVER_BLACKLISTS which is used to accept a list
of blacklist from the server, one for each game driver version that needs to
have blacklist, and GAME_DRIVER_BLACKLIST will only contain a list of
blacklisted application package names for the current version of game driver on
the device, separated by comma.
BUG: 120869311
Test: Build, flash and boot. Use adb shell settings put command to verify.
Change-Id: Ic49800cd0b5b82ddbbdf9907d603243415d5bd3b
When ANGLE is enabled for an app, show a dialog box to the user to
indicate that ANGLE is in use. This is useful because there are
not (or at least shouldn't be) any visual indication that a different
OpenGL driver is in use.
Bug: 120489005
Test: atest CtsAngleIntegrationHostTestCases
Test: Load an app with ANGLE enabled and verify dialog box is shown.
Test: Load an app without ANGLE and verify dialog box is not shown.
Change-Id: I5e87ec96582d43666cfcca2266b46ce98b859a32
