Fixed one setting that was migrated but not marked deprecated.
Removed a hidden setting that is no longer used by the new
power manager service.
Bug: 7231172
Change-Id: I332f020f876a18d519a1a20598a172f1c98036f7
Also fix a bunch of system services that should be doing this. And
while doing that, found I needed to fix PendingIntent to evaluate
USER_CURRENT at the point of sending, not creation.
Note that this may end up with us having some notification shown to
non-primary users that lead to settings UI that should only be for
the primary user (such as the vpn notification). I'm not sure what
to do about this, maybe we need a different UI to come up there or
something, but showing the actual notification for those users at
least seems less broken than not telling them at all.
Change-Id: Iffc51e2d7c847e3d05064d292ab93937646a1ab7
You can now use ALL and CURRENT when sending broadcasts, to specify
where the broadcast goes.
Sticky broadcasts are now correctly separated per user, and registered
receivers are filtered based on the requested target user.
New Context APIs for more kinds of sending broadcasts as users.
Updating a bunch of system code that sends broadcasts to explicitly
specify which user the broadcast goes to.
Made a single version of the code for interpreting the requested
target user ID that all entries to activity manager (start activity,
send broadcast, start service) use.
Change-Id: Ie29f02dd5242ef8c8fa56c54593a315cd2574e1c
The activity notification is received from netd, an intent
DATA_ACTIVITY_CHANGE is then raised for other part of the system to
consume.
Change-Id: Idfcc4763c51c5b314c57f546c12557082f06bebf
These have been created to reduce the size and complexity
of frameworks/base.
mms-common was created by moving all of
frameworks/base/core/java/com/google/android/mms
to:
frameworks/opt/mms
telephony-common was created by moving some of
frameworks/base/telephony
to:
frameworks/opt/telephony
Change-Id: If6cb3c6ff952767fc10210f923dc0e4b343cd4ad
Tethering was re-evaluating everything on any connectivity change.
This was causing problems when mobile data was not available as each
re-eval was again requesting a connection which would fail and loop.
Ignore FAILED states to break this cycle in a minimal change.
bug:6668233
Change-Id: Ia1dfc6abff1fe464e9501b50185cdb8d0fbb7ff6
When we find a higher priority match for tethering traffic we should turn off
whatever we were trying before.
bug:6083611
Change-Id: I06ee41336df107353bf1a979150345e461574a48
This fixes a complaint from carriers (that we used 8.8.8.8), but also
fixes the case where there is only room for one live radio
connection: the secondary connection (tethering) doesn't have a
default route to prevent on-device traffic from slipping out on the
tethering connection, but tethered dns is proxied through dnsmasq, so
it is appearing as on-device traffic and is unroutable. By switching
to the carrier-indicated dns servers we can use the host-routes
already set for those and kill two bugs with one fix.
bug:5525764
bug:3045311
Change-Id: Ib1ccea81e0c0ed2d1462dc9721c2647124a790da
Outsiders asking for this list may cause the list to change on another thread.
Fixing general synchronization issues.
bug:5531630
Change-Id: I7a3ee0bba3db40f45bcb0159491942fa4cf38c37
Sometimes the interface is removed before we can untether leading to
errors when cleanup up various rules (iptables). Do as much as we can
and then let a re-tether result in error if needed.
bug:5536516
Change-Id: Ib1d064ecc8e9022566f9b0e4678b33144906971c
Two issues. A mcc/mnc-driven overlay means that the config at boot may not be
the config we wish to use - the sim card is read later which may switch the
config. Changed to read the configuration each time rather than once at boot.
Second, the secure-setting override was always trumping the resource config
as we weren't discriminating between a not-set default and a real setting.
This meant the config could never make DUN-required.
bug:5495862
Change-Id: Icd4e90ac1d32bbb704c0ff9cc69e954fb0a0b58c
Watch for changes to telephony network subtype, and update iface
mapping to persist stats under correct type. Update network stats
before removing tethering NAT rules.
Skip recording that would create empty historical buckets. Query UID
stats before iface stats to always skew positive when counters are
actively rolling forward.
Bug: 5360042, 5359860, 5335674, 5334448
Change-Id: I8aa37b568e8ffb70647218aa1aff5195d3e44d5a
Use new "gettetherstats" netd command to retrieve statistics for
active tethering connections. Keep tethering poll events separate
from UID poll, even though they end up same historical structures.
Bug: 5244846
Change-Id: Ia0c5165f6712c12b51586f86c331a2aad4ad6afb
Well, actually they do go out, but they won't try to start anybody now
until after boot.
bug:5088272
Change-Id: Iaaf7a1e4b300e0afc3901ecfd225a77084bd0954
The kernel sends an interface down event for usb0 when RNDIS is enabled.
Ignore this and only remove USB interfaces when we receive the
interface removed event.
Change-Id: I1458f259b96c9fab4d3a69a5692e630123fad136
Signed-off-by: Mike Lockwood <lockwood@android.com>
The set config will only update hostapd config file right now and we need to restart after that happens.
Also, softap interface is changed to be the regular interface
Bug: 5069108
Change-Id: Ibe80129b58e5339f06f186870bcd8f37569c6db3
The previous approach no longer works with the new USB drivers, since the usb0
interface is no longer enabled by default.
This introduced a chicken & egg problem - usb0 will not be enabled until the
user tries to start tethering, but Settings will not enable the checkbox unless
usb0 is enabled.
To fix this we add an explicit call to start USB tethering in the connectivity manager.
This will enable RNDIS if necessary and then bring up tethering once usb0 is enabled.
Change-Id: Iae1f733366aa6b0dafa66d4c97207794173ef54b
Signed-off-by: Mike Lockwood <lockwood@android.com>
This is a 1st pass at receiving events that indicate
some quota has been reached e.g. warning quota, data collection quota,
cutoff quota,...
It needs:
- new kernel with quota2 logging support
- new net:bandwidthcontroller that supports
. quota2,
. setting alerts.
- new NetlinkEvent/NetlinkManager/NetlinkHandler to process
NETLINK NFLOG messages.
Change-Id: Ibfbb13512c5350cdee0e544ec14caa6f59812409
The new link-status netlink monitor is a bit chatty and we were getting race conditions.
The wl0.1 soft-ap interface was getting created, but in the off state. We would report
it available (link-added always reports it) causing wifi to start tethering, but then
we'd sometimes get a link-status-down notification and a link-status-up, causing wifi
to freak out with these two requests.
The simple fix was to not listen to the new link-status notifications. This should be
redesigned in the future.
bug:4983942
Change-Id: Ica4f34d8bf2a07fc19b35a1e15283a7f8022165e
After unreverting the linkstate change patch, hook up notification handlers
that didn't exist when the first patch was created, like
EthernetDataTracker.java and Vpn.java.
For the observers that handle interfaceStatusChanged(), I made
interfaceLinkStatusChanged() call it so they both do the same thing.
Change-Id: I0077e5e5f48f3932ba98f5bf363243892f2de6cc
Signed-off-by: Mike J. Chen <mjchen@google.com>
This reverts commit 1a7e671902.
Bring back the changes from Stan Chesnutt regarding link-status-change
notifications. The comment from the original patch was:
Propagate new link-status-change message to any NetworkManagementService
observers. Also fix the syntax of the "interface-status-change" message. Add
a null handler in the ThrottleService and Tethering classes (plus fix names).
Change-Id: I42cbed692024de32275cad234f42ff23ab7e9d8d
Signed-off-by: Mike J. Chen <mjchen@google.com>
Due to the property trigger on persist.sys.usb.config,
setting the default function also sets the current function.
Now we combine both of these methods into setCurrentFunction, which has
a "makeDefault" option to make the new function the default.
This change should eliminate some problems with setting properties due to
multiple property triggers happening at the same time.
Change-Id: I9851299e9c2ee20475eada1a8104c0d50bf5a9e1
Signed-off-by: Mike Lockwood <lockwood@android.com>
Used to use iface names, but on mobile ifaces are multipurpose.
Refined to use ConnectivityService types.
bug:4530116
Change-Id: Iaa632d5f540d27ffff683bd7d94f8004bf422e71
Remove obsolete RNDIS support from NetworkManagementService
This change fixes USB tethering, which broke after the new USB gadget driver
changes went in.
Change-Id: Idd987fb2c39c40e81ebc92e6d8dae9fe77ed4ddc
Signed-off-by: Mike Lockwood <lockwood@android.com>
Handles the scenario of radio technology handover with IP continuity.
Once RIL/Modem finished a handover operation, an unsol data call state
change will be send up to FW notifying all link propertes changes.
FW will then re-configure the device with new link properties
including iptable used by Tethering.
Change-Id: I05e29f66ac3db8ba4274d3662642607742ba1d12
As a work around for the issue of picking
the wrong interface, add a check for selecting
an upstream interface that has a valid IP configuration
Bug: 3362306
Change-Id: I3e8ab5ef30b69f1adab755d83f5b65c078f73936
Generates InetAddresses without risking an accidental dns lookup. For use with supposedly
numeric-only ip address strings.
Change-Id: I694f3976ce1c6382854706f6557ea88a289add3a
