Need to call TrustManagerFactory#init before use. I suspect this class
isn't used anywhere since this hasn't caused a problem yet.
Change-Id: I17425d0bba4795d71960062361a755830abba7de
This allows the new X509ExtendedTrustManager to be used instead of
Conscrypt directly.
Bug: 13103812
Change-Id: I736f475342395f26657f2371828a6d3a0065a50a
Due to race conditions or programming errors, the NsdManager
can attempt to process an asynchronous status message (and issue
a callback to the listener) after the listener has already been
removed from the NsdManager state. This causes dereferencing of
null objects, and a crash.
Split out the three async-queue message cases: these are ones
in which message.arg2 does not hold an NsdManager array index
and the code should not interpret this field as if it were.
Add an explicit check for "null listener" (the array index in the
message has already been released), log a warning, and exit early.
Safeguard accesses to the "NSD service type" string from a (possibly
null) NsdServiceInfo object... return a constant "?" string rather
than crashing.
Bug: 9016259
Change-Id: I40aabdfc65d86fdd0eaac7a1e7e56e6ff69796cf
After accepting a connection on a listening socket and
storing the resulting FileDescriptor into a newly created
LocalSocketImpl, the new impl's "descriptor was created
locally and should be closed normally" flag should be set.
(cherrypicked from 3e7305c6bf)
Bug: 11805817
Change-Id: I0a1a7c62ec3fbcf647a44a22110ddc778d14e5f4
This is necessary so that the framework can know whether an IPv6
address is likely to be usable (i.e., if it's global scope and
preferred). Also, it will simplify the address notification
methods in INetworkManagementEventObserver, which currently take
the address, the flags, and the scope as separate arguments.
1. Add flags and scope to the class and update the unit test.
Use the IFA_F_* and RT_SCOPE_* constants defined by libcore.
Since most callers don't know about flags and scope, provide
constructors that default the flags to zero and determine the
scope from the address. Addresses notified by the kernel will
have these properly set. Make multicast addresses invalid.
Update the class documentation.
2. Provide an isSameAddressAs() method that compares only the
address and prefix information between two LinkAddress
objects. This is necessary because an interface can't have
two addresses with the same address/prefix but different
flags.
3. Update LinkProperties's addLinkAddress and removeLinkAddress
to identify existing addresses to add/remove using
isSameAddressAs instead of implicit equals(). Specifically:
- If addLinkAddress is called with an address that is already
present, the existing address's flags and scope are updated.
This allows, for example, an address on an interface to go
from preferred to deprecated when it expires, without it
having to be removed and re-added.
- If removeLinkAddress is called with an address that is
present but with different flags, it deletes that address
instead of failing to find a match.
4. Update the INetworkManagementEventObserver address
notification methods to take just a LinkAddress instead of
LinkAddress, flags, and scope. While I'm at it, change the
order of the arguments for consistency with the other
functions in the interface.
Change-Id: Id8fe0f09a7e8f6bee1ea3b52102178b689a9336e
1. Simplify the parceling code. Since the InetAddress inside a
LinkAddress can never be null, we don't need to special-case
the case where it is.
2. Add / update method documentation.
3. Write a unit test.
Change-Id: Iba0a8cecc683d55d736419965e72ee33dd66dc22
Currently address{Updated,Removed} pass in the address as a
string such as "fe80::1/64". Use LinkAddresses instead, since
that's what it is.
This makes the code more robust in the unlikely case that netd
passes in an invalid string. In the future we can move flags and
scope into the LinkAddress itself and simplify the code further.
Bug: 9180552
Change-Id: I66599f9529cf421caa7676fdd0141bb110b8589e
These are sent if the device receives IPv6 Router Advertisements
with DNS server configuration options. Currently, nothing listens
to them; in a future change we will use them as IPv6 DNS servers.
[Cherry-pick of 416740ad4d]
Bug: 9180552
Change-Id: I05000c0cd3867a68ab390102e8470b6912a9d3aa
ethernet especially Gigabit enet use the same tune data with wifi
won't reach best performance.
Change-Id: Iac50ba47904c76ff7b5b8ad226e83451359ec534
Signed-off-by: Jianzheng Zhou <jianzheng.zhou@freescale.com>
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
bug:11598568
Change-Id: Idff5ae81119d8143da096b5291ecbfbc5875cbd4
b/11598568
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Change-Id: Ib93d24a80af1a329694f07c47bd81dfcc1e1b874
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
This was found by a bug in Firefox where it expects the addresses from a
ProxySelector to be unresolved. Since ProxySelectorImpl returns unresolved
addresses the PAC version should as well to avoid breaking apps.
The ProxyServer also needed to be updated to reflect this change as it was
expecting a resolved InetSocketAddress.
Bug: 11443853
Change-Id: I3a4e9e248d22d7808603c147660df708e01cdf82
The method was returning all supported cipher suites instead of the
default ones only. The default list of cipher suites actually used by
sockets created by this factory is not affected by this issue.
Change-Id: I2e4d7c6547fcb29ff7a0943bc8791706cc8d22bc
Changes the PacManager to report message back to ConnectivityService
to send a broadcast once the download has completed. This allows the
ConnectivityService to store the correct proxy info for getProxy().
This made the problem arise that ProxyProperties was not handling port
while it had PAC. Added small fix for equals() and parcelization.
The combination of these fixes seems to resolve Bug: 11028616.
Bug: 11168706
Change-Id: I92d1343a8e804391ab77596b8167a2ef8d76b378
There are two bugs one is I was clearing the notification in
CaptivePortalTracker when entering the ActivateState. (double check
according to bug 5021626 we should be calling enter)
Second is we could have the need to display both icons but can't
because we only allow one.
The solution I'm proposing here is to allow two notifications and
have then controlled separately.
Bug: 10886908
Change-Id: I30e7130bc542535492d175640a4990c592f32806
Previously I was calling setIsConnectedToProvisioningNetwork(false) always,
but all MDST's receive every broadcast. Thus we could over write an MDST's
mNetworkInfo.mIsConnectedToProvisioningNetwork to false, unless the MDST
that was set to true was last, i.e the code was order dependent.
If the provisioning networks value was false instead of true
when handleMobileProvisioningAction was called we wouldn't invoke
mdst.enableMobileProvisioning because network info would be null.
Thus the provisioning network would never transition to CONNECTED and
a default route wouldn't get setup and the browser couldn't access the
website.
Now setIsConnectedToProvisioningNetwork is only set to false when the
apnType matches and we won't indiscriminately change it and are not
order dependent.
Bug: 10853805
Change-Id: I68a4f9bdf5dc18d90f4cdef7a60811f57be67261
This changes the PAC support to not broadcast the Proxy information until
the Local Proxy has started up and successfully bound to a port so that
the local proxy information can be guaranteed to be owned by the proxy.
Bug: 10459877
Change-Id: I175cd3388c758c55e341115e4a8241884b90d633
netd now tracks statistics for tethered interfaces across tethering
sessions, so switch to asking for all tethering stats. (Currently
we're double-counting all tethering data, ever since it started
tracking across sessions.)
Also catch OOME to handle corrupt stats files, which we then dump to
DropBox and then start over.
Bug: 5868832, 9796109
Change-Id: I2eb2a1bf01b993dd198597d770fe0e022466c6b9
Instead of local instance of the default HostnameVerifier, use it
directly from HttpsURLConnection. This avoids class preloading creating
an instance of it before it's necessary.
(cherry picked from commit 928ee1e48f)
Bug: 9984058
Change-Id: I9017256b3b5d137aeb5a6f455868af7bdfec7885
Added a hidden API under ConnectivityManager to toggle airplane mode.
This may be a temp solution for b/10653570.
bug:10653570
Change-Id: I0b2b42230073289eb8dc6891317d62b84e26c133
Able to config network specific MTU size. Normally, the default size of MTU is 1500.
US - ATT 1410, TMUS 1440, SPRINT 1422
KR - SKT 1440, KT 1450, LGU+ 1428
JP - KDDI 1420, SoftBank 1340
CA - RGS 1430, FIDO 1430, MTS 1430, BELL 1358, SaskTel 1358
AU - TEL 1400
Bug: 10195070
Change-Id: Ie18650b37a3d44af944f2dae4aa97c04fb12cd5e
