Define new player types to describe the two types of AudioPlayer
in OpenSL ES: those with a buffer queue source, those that
play from a given URI or FD.
Add a warning in the interface description of AudioService
that changes should be reflected in the native interface too.
Test: make, NDK tests to follow
Bug: 30955183
Change-Id: I7b530ea6e3b13f238f662ce8b9612e7df574a9c5
Some carriers want to further simplify network settings based on a
variety of wifi or cellular related bundles. Expose a config a
carrier might set to allow SysUi, Settings and platform to adjust.
BUG: 33111931
Test: runtest carrierconfig-unit
Change-Id: I35a7ef15bbba23cf9e0380432fc001804c7e1804
The UX spec requires each cluster to remember which view was last
focused in it, and focus on it upon the teleportation to this
cluster.
This CL implements saving and restoring the focus.
It also introduces a public API so that an app could switch to a
cluster as if it was teleported to.
Bug: 32151632
Test: Manual checks; CTS are coming after feature freeze.
Change-Id: I0dc816776386015a7f1235f93e3dd9c03dfffcd6
This change allows the system to perform iterative reset
of changes to settings in order to recover from bad a
state such as a reboot loop.
To enable this we add the notion of a default value. The
default can be set by any package but if the package that
set it is a part of the system, i.e. trusted, then other
packages that are not a part of the system, i.e. untrusted,
cannot change the default. The settings setter APIs that
do not take a default effectively clear the default. Putting
a setting from a system component always makes it the
default and if the package in not trusted then value is
not made the default. The rationale is that the system is
tested and its values are safe but third-party components
are not trusted and their values are not safe.
The reset modes from the least intrusive are: untrusted
defaults - reset only settings set by untrusted components
to their defaults or clear them otherwise; untrusted clear
- clear settings set by untrusted components (or snap to
default if provided by the system); trusted defaults - reset
all settings to defaults set by the system or clear them
otherwise.
Also a package can reset to defaults changes it made to
the global and secure settings. It is also possible to
associate a setting with an optional token which can then
be used to reset settings set by this package and
associated with the token allowing parallel experiments
over disjoint settings subsets.
The default values are also useful for experiment (or
more precisely iterative tuning of devices' behavior in
production) as the stable configuration can be set to
the "graduated" safe defaults and set the values to the
experimental ones to measure impact.
Test: tests pass
Change-Id: I838955ea3bb28337f416ee244dff2fb1199b6943
There are currently no clients of this attribute, but that's coming in
a later CL.
Bug: 31440308
Test: n/a theme only
Change-Id: I18a06776d648750638f83ad10566d318d8ef7dd0
AudioService keeps track of status of implementations of PlayerBase.
AudioService's PlaybackActivityMonitor maintains a list of
playback configurations for each PlayerBase, and a list
of clients that want to receive updates about the playback.
Playback activity clients can query the playback configuration
of the system through AudioManager, or register a callback
for updates. For clients with MODIFY_AUDIO_ROUTING permission
(system), the playback configurations contain more information
about each player (player type, uid, pid, state), and can see
all players, not just the "active" ones. The act of stripping
off data about the players that is not supposed to be seen
by non-system clients, is referred to as "anonymization". It
is implemented in system server, so no system data is ever
sent to playback activity clients without system permission.
More information about the AudioPlaybackConfiguration is
available in the SystemApi (uid, pid, player type, player state).
Test: run cts -m CtsMediaTestCases -t android.media.cts.AudioPlaybackConfigurationTest
Bug: 30955183
Change-Id: I85997594c0378216419f5f0fdaa0714996fd3573
In this iteration badges are a user opt in feature.
Known issue: all listeners will receive 'badge only' notifications.
Test: runtest systemui-notification
Change-Id: Ic7450bf4de5351cfdc72bd96ec946fe6e035035c
Feature is already built under the hood, but it needs it's own public
StrictMode API so it can be independently enabled.
Test: builds, boots
Bug: 32447617
Change-Id: I3c0c6d62dd36aaf25f30e0ef8e0e7b40cf32c6d2
On userdebug/eng devices, the shell can run as non-shell UIDs, so
define a flag to identify broadcasts coming from the shell, and
don't yell if they're non-protected.
Test: builds, boots, root shell can send broadcasts
Bug: 32369665
Change-Id: I5f55930ee434cb8318c86aaf05eba3c59a326694
This change allows the system to perform iterative reset
of changes to settings in order to recover from bad a
state such as a reboot loop.
To enable this we add the notion of a default value. The
default can be set by any package but if the package that
set it is a part of the system, i.e. trusted, then other
packages that are not a part of the system, i.e. untrusted,
cannot change the default. The settings setter APIs that
do not take a default effectively clear the default. Putting
a setting from a system component always makes it the
default and if the package in not trusted then value is
not made the default. The rationale is that the system is
tested and its values are safe but third-party components
are not trusted and their values are not safe.
The reset modes from the least intrusive are: untrusted
defaults - reset only settings set by untrusted components
to their defaults or clear them otherwise; untrusted clear
- clear settings set by untrusted components (or snap to
default if provided by the system); trusted defaults - reset
all settings to defaults set by the system or clear them
otherwise.
Also a package can reset to defaults changes it made to
the global and secure settings. It is also possible to
associate a setting with an optional token which can then
be used to reset settings set by this package and
associated with the token allowing parallel experiments
over disjoint settings subsets.
The default values are also useful for experiment (or
more precisely iterative tuning of devices' behavior in
production) as the stable configuration can be set to
the "graduated" safe defaults and set the values to the
experimental ones to measure impact.
Test: tests pass
Change-Id: I8c23b145d4f8ee0de2f29dedaa4641ac59343d6a
- Expose ScanResult#untrusted to inform NetworkRecommendationProviders
that a ScanResult does not correspond to a saved network.
- Add static construction methods and assertions to RecommendationResult
Test: runtest frameworks-services
Bug: 33490132
Change-Id: If7006040f63843c1c468c9d95c5c017383c5c5dd
Adds support for supplying custom call forwarding prefixes in the carrier
config. When a prefix supplied in the carrier config is matched to the number
being dialed, we do not complete the call and instead show an error message
on the dialer UI.
Test: Manual
Bug: 30458052
Change-Id: I3149a565b0fd631d69ab0c0f27be509237b80177
Define the key to be used to store the rankingScoreOffset inside the
ScoredNetwork bundle. Implement a platform API method to calculate the
ranking score for a given rssi.
Bug: 33049302
Test: Unit tests
Change-Id: Ia3fea2197d7c211a2313fced8713d79d8d5f4f6e
Topic: ScoredNetworkRankingScore
This allows NetworkRecommendationProviders to set this field on
returned WifiConfigurations.
Test: make
Bug: 33760009
Change-Id: I4d34272a1fb8d88bcc56cf4f00d8beadd06ac603
This configuration uses 64 bits per pixel. Heach component is stored as a
half precision float value (16 bits). Half floats can be decoded/encoded
using android.util.Half.
RGBA_F16 bitmaps are used to decode wide-gamut images stored in 16 bit
formats (PNG 16 bit for instance). aapt is currently not aware of PNG
16 bits so such files must be placed in raw/ resource directories.
This first pass provides only partial drawing support with hardware
acceleration. RGBA_F16 bitmaps are stored in linear space and need
to be encoded to gamma space with the appropriate OETF to be rendered
properly on Android's current surfaces. They are however suitable for
linear blending. Full rendering support will be provided in a future
CL (BitmapShaders might be a bit tricky to handle properly during
shader generation).
Bug: 32984164
Test: bit CtsGraphicsTestCases:android.graphics.cts.BitmapRGBAF16Test
Change-Id: I328e6b567441a1b9d152a3e7be944a2cf63193bd
Per the UX spec, key combos for quickly jumping between clusters are
Meta+Right and Meta+Left. However, these events don’t get delivered
to the app, and I’ll have to implement this plumbing after the
feature freeze. For now, the temporary combos are Ctrl-Shift-”-”
and Ctrl-Shift-”+”.
In addition to the key combo processing, the CL adds public APIs for
teleportation; they are similar to the API for moving the focus.
Bug: 32151632
Test: Manually checking that teleportation works. CTS test will be
added after the feature freeze.
Change-Id: I622156b9e4cc7c44e61623081d6d079bbe04fd02
There are a few major pieces here:
incidentd
---------
This daemon (started by init) runs and accepts incoming requests to take
incident reports. When prompted, it calls into various system services
and fills in an IncidentProto data structure, and then writes the report
into dropbox.
The next steps for incidentd:
- Security review of SELinux policies. These will be a subset of
the dumpstate permissions. Until this is done, incidentd is
not started at boot time.
incident
--------
This shell command calls into incidentd, and can initiate an incident
report and either capture the output or leave for dropbox.
incident_report
---------------
This host side tool can call adb shell with the correct parameters
and also format the incident report as text. This formatting code
was left of the device on purpose. Right now it's pretty small, but
as the number of fields increases, the metadata and code to do the
formatting will start to grow.
The incident_report command also contains a workaround to let it
work before incidentd is turned on by default. Right now, it is
implemented to call adb shell dumpsys <service> --proto directly,
whereas in the future it will go through the full incidentd flow.
incident_section_gen
--------------------
A build-time tool that generates a stripped down set of information
about the fields that are available.
libincident
-----------
This library contains the code to connect to incidentd, and the
meta proto definitions that are used by the framework protos.
The basics are here now, but they are not fully fleshed out yet.
The privacy.proto file contains annotations that can go in the
proto file that we will later use to filter which fields are
uploaded, and which are used by local sources. For example, a
device in a test lab is safe to upload much much more information
than a real user. These will share the same mechanism, but the
user's output will be filtered according to these annotations.
frameworks/core/proto
---------------------
These .proto files contain the definitions of the system's
output. There is one master android.os.IncidentProto file that
is the top level of an incident report, but some other services
(notification, fingerprint, batterystats, etc) will have others
that are used directly by the logging mechanism.
Other files which are shared by several of the services also go
here, such as ComponentName, Locale, Configuration, etc. There
will be many more.
There is also a first iplementation of a dump method handling
--proto in the fingerprint service.
IncidentManager
---------------
The java API to trigger an incident report.
Test: Not written yet
Change-Id: I59568b115ac7fcf73af70c946c95752bf33ae67f
