* changes:
[IT06]Move INetworkActivityListener into connectivity module
[IT05] Remove the unused network activity logic out from NMS
[IT4.7] Add network activity info into dumpsys for debugging
[IT4.6] Unbundle NMS out from ConnectivityManager
[IT4.5] Update radio power from CS directly
These cause the tests to crash on eng builds, so disrupt
development.
Test: atest FrameworksNetTests passes on eng build
Change-Id: Ifa5131fdb8f57af812cf688970be6588d2879c29
ConnectivityService is no longer to update idle timer to NMS but
send to INetd directly after this change. Replace the API
implementation in ConnectivityManager to refer into
ConnectivityService instead of NetworkManagementService to remove
the dependency between CM and NMS for ConnectivityService mainline.
Bug: 170598012
Test: atest FrameworksNetTests
Change-Id: If0ac9a6427dba5a732a15b5d7ca1351b71b07b7b
Unit test automation for setOemNetworkPreference() API functionality on
ConnectivityService.
Bug: 178632672
Bug: 176494815
Bug: 170068946
Test: atest FrameworksNetTests
Change-Id: Ib76917f0fa78b736207f82d99137a6cf49481b20
Currently, BroadcastInterceptingContext always runs broadcast
receivers on the thread that called sendBroadcast. This means:
1. Receivers might run on the wrong thread, making the test less
realistic.
2. If any receiver checks what thread it's running on, then
either the check needs to be modified or deleted, or the test
must call sendBroadcast on the thread that the receiver
expects to run on. The latter is impossible when there is more
than one receiver that needs to run on more than one thread.
This CL adds a setUseRegisteredHandlers method that allows tests
to say that they want each receiver to run on the Handler
specified at registration time.
This CL also enables the new mode for ConnectivityServiceTest,
and resolves a TODO to re-enable a disabled thread check.
The new mode cannot be enabled by default because it would break
most of the tests.
All the below tests pass except for the car bluetooth test
testAutoConnectAdapterOff_returnsImmediately which was already failing.
Bug: 173331190
Test: atest CarInputServiceTest BluetoothProfileDeviceManagerTest
Test: atest NetworkPolicyManagerServiceTest
Test: atest ConnectivityServiceTest
Test: atest TetheringTest TetheringNotificationUpdaterTest
Test: atest VersionedBroadcastListenerTest EntitlementManagerTest
Test: atest TetheringConfigurationTest
Test: atest CachedDeviceStateServiceTest
Test: atest EmergencyAffordanceServiceTest
Change-Id: I3303bb14516f07a55d82a16b59c111ab3f8b0389
* changes:
Check registering system default callback needs NETWORK_SETTINGS.
Move VPN code from ConnectivityService to VpnManagerService.
Add a skeleton VpnManagerService, and start it on boot.
Convert LockdownVpnTracker to NetworkCallbacks.
Minor fixes to VpnTransportInfo.
Revert submission 1579872-vcn07
Reason for revert: Possible culprit for b/179768816, broken ConnectivityControllerTest
Reverted Changes:
Id09b19c13:Address comments on aosp/1550755
I245bd69e0:[VCN07.1] Add test for bypassing VCN for non-inter...
I9936894b9:[VCN07] Bypass VCN for non-internet app accessible...
Change-Id: Ie5f8c3051fed40623e5d4705ac2243ef51a898bd
ConnectivityService itself does not depend on mVpns or the Vpn
class any more. Most of this CL is simply moving code from one
class to another:
- Move the AIDL calls from IConnectivityManager to IVpnManager.
- Move the implementation from ConnectivityService to
the new VpnManagerService.
- Move the APIs from ConnectivityManager to VpnManager, but
temporarily maintain some shims in ConnectivityManager for the
moved calls so that existing callers do not have to be modified
in this CL.
- Update VpnService to call IVpnManager instead of
IConnectivityManager.
- Move the code that registers the VpnManager service from
ConnectivityFrameworkInitializer to SystemServiceRegistry.
Bug: 173331190
Test: atest HostsideVpnTests FrameworksNetTests CtsNetTestCases
Change-Id: I4911e2144df721a94fa00da9edf0dc372a7091c2
This will allow moving LockdownVpnTracker from the connectivity
to the VPN code. This requires moderate refactoring since it's
pretty tightly coupled to both.
In this CL:
1. Add an @hide API to tell ConnectivityService that legacy
lockdown VPN is enabled. I chose not to use the existing
setVpnRequiredForUids API because that method has specific
semantics and because it will be required long term since
it's used by non-legacy VPN types.
2. Instead of updating LockdownVpnTracker inline from the
ConnectivityService handler thread, have it listen to
NetworkCallbacks. This introduces an extra thread hop, but
most of the interactions between the lockdown VPN and CS were
via NetworkAgent, which is asynchronous anyway.
3. Add code to LegacyTypeTracker to send the extra
CONNECTIVITY_ACTION broadcast for the underlying network type
that is sent after the VPN connects. In order to do this, make
Make LockdownVpnTracker specify its underlying network
(via setUnderlyingNetworks) when it connects.
4. Reimplement LockdownVpnTracker#augmentNetworkInfo based on
information that is available in ConnectivityService.
5. Remove the code in LockdownVpnTracker that counted errors.
I think this code has not worked since lollipop, because
ConnectivityService never sees NetworkInfo objects in state
FAILED. This is because ConnectivityService only hears about
NetworkInfo objects via NetworkAgents, and LegacyVpnRunner
only registers its NetworkAgent when the connection succeeds.
Bug: 173331190
Test: passes existing tests in ConnectivityServiceTest
Change-Id: I66d18512882efd468ee0ecec61f28786a195b357
Use data that is already available in ConnectivityService
instead.
The behaviour of the new implementation is slightly different
from Q and R code when the permission check fails.
- The old code would throw a SecurityException if an app that
was not an active VPN called the method, and would return
INVALID_UID if the connection belonged to a UID that was not
subject to the VPN.
- The new code returns INVALID_UID in both cases.
This does not seem like a compatibility problem. The only case in
which the code throws SecurityException is if the app is not a
current VPN app, but the app already knows whether it is or not.
The docs don't mention that the method SecurityException, either.
Bug: 173331190
Test: atest FrameworksNetTests
Test: atest HostsideVpnTests
Change-Id: If3d031e74df33b5c97e12ebf02272faac6769d50
This currently stores the VPN type and a session name, but can be
extended in the future.
Bug: 173331190
Test: added coverage in VpnTest
Test: added coverage in ConnectivityServiceTest
Test: added coverage in NetworkAgentTest
Change-Id: I450858a9fa332c8d896dbdb4c14337d5ec23677f
This method allows internal components to track the system
default network. This differs from registerDefaultNetworkCallback
because that method sends callbacks for the default network for
the UID that called it. This may not be the system default
network, for example, when a VPN is up and applies to the UID.
Bug: 173331190
Test: new unit tests in ConnectivityServiceTest
Test: new unit tests in ConnectivityManagerTest
Test: new CTS tests in ConnectivityServiceTest
Test: new CTS tests in HostsideVpnTests in other CL in this topic
Change-Id: Id02748a2183f71b71ff2a53a580466b9dcecaa93
- Added API to add T&C URL in the CaptivePortalData class, and to
indicate if the source is from Passpoint.
- Added source indication for the Venue URL API.
- Allow the connectivity service to send a new T&C acceptance
notification.
- Updated the merge method to prefer the Capport data over the
network agent data, if the source is not authenticated (not from
Passpoint).
- Propagate the Venue Friendly name to the captive portal activity
to be used instead of SSID, when available.
Bug: 162785447
Test: End-to-end test
Test: atest ConnectivityServiceTest
Test: atest CtsNetTestCasesLatestSdk:CaptivePortalDataTest
Test: atest NetworkNotificationManagerTest
Change-Id: I4e77c3b6c01941b03c46ad32da70c77e0fecac64
Not currently setting the atttribution tag for location
permission checks. Plumb the attribution tag for all location permision
checks (so that location access is correctly attributed to individual
components within an app)
Bug: 162602799
Test: atest android.net
Test: atest com.android.server
Change-Id: Iee95f05204f51a4f8cb1f36acfb60e8cdeb156f4
* changes:
Change ConnectivityServiceTest to prepare for VPN code move.
Add to VpnManager the VPN APIs used by Settings and SystemUI.
Remove temporary hack in VpnTest.
No-op changes to make it easier to review the VPN code move.
1. Set underlying networks via MockVpn, not ConnectivityService.
2. Add a processBroadcastForVpn utility method that we can modify
without too much churn when the code is moved.
Bug: 173331190
Test: test-only change
Change-Id: I4256ca5f33034ef9d1de79857795a6ed1d644e61
This is mainly used by VCN, where VCN-eligible networks might
be registered before VCN management service can fire request
to prevent the newly created network from being torndown
immediately by ConnectivityService.
Test: atest ConnectivityServiceTest#testNewNetworkLingering
atest ConnectivityServiceTest#testNewNetworkLingering_bgNetwork
atest FrameworksNetTests --rerun-until-failure 20
Bug: 175180558
Change-Id: I7768daf4cf2d8f6d8057b5107412e06104ba82e0
ConnectivityService is going to become a mainline module which
will not able to access hidden APIs. NetworkPolicyManagerInternal
is a internal serivce that CS can't be access after be a mainline
module. Thus, create NPM#checkUidNetworkingBlocked to replace it.
Bug: 170598012
Test: atest FrameworksNetTests
Test: atest CtsNetTestCases
Test: atest CtsHostsideNetworkTests
Test: atest FrameworksCoreTests:NetworkPolicyManagerTest
Test: atest FrameworksServicesTests:NetworkPolicyManagerServiceTest
Change-Id: I7bee37522dc5c55c255b159fda9481eff663655a
Deduce the NET_CAPABILITY_NOT_VCN_MANAGED capability from other
capabilities and user intention, which includes:
1. For the requests that don't have anything besides
VCN_SUPPORTED_CAPABILITIES, add the NOT_VCN_MANAGED to
allow the callers automatically utilize VCN networks
if available.
2. For the requests that explicitly add or remove
NOT_VCN_MANAGED, do not alter them to allow user fire
request that suits their need.
Test: atest NetworkRequestTest#testBypassingVcnForNonInternetRequest
Bug: 175662146
Change-Id: I9936894b9530a22fb186cfd25cbee0fced65b72b
Currently, the tests only check whether the method throws a
SecurityException or not. Also check the return value of the
call, by mocking out InetDiagMessage.getConnectionOwnerUid.
This is required to test an upcoming change that will never
throw SecurityException but always return INVALID_UID if the
caller lacks permissions.
Bug: 173331190
Test: test-only change
Change-Id: I63f42a2f098fcf8796c9b4525a3a7b8320c0a139
This simplifies the uidNetworkingBlocked method and makes it more
realistic by supporting more combinations of rules than just the
four used by this test.
Also support RULE_ALLOW_METERED, and add test coverage for it.
Test: test-only change
Change-Id: Id4f6c7f41429f3ae7841d3214b3e5e95ec591f85
The score argument is going away, so there no longer
is a need to test it. It's never been used by anybody
and is actually a problem going forward.
Since removing the argument requires a small re-arch
of the testing tool anyway, rebuild expecting requests
on top of TrackRecord. This simplifies the test a
great deal, as well as (as observed in running the
tests) makes the test faster.
Test: this
Change-Id: If03b9e64f14ac8ffa5398b964939a9a45a74b28d
As a preparation of exposing system API. This patch does some
harmless refactoring, which includes:
1. Change raw arrays into lists according to API guidelines.
2. Write test.
3. Rename class to UnderlyingNetworkInfo.
4. Rename vpnIface to iface.
5. Make underlyingIfaces @NonNull in order to adapt new
unparceling code.
6. implement equals and hashCode for testing.
Test: atest android.net.UnderlyingNetworkInfoTest
Bug: 174123988
Change-Id: I405c21e57c4af8a12a9dd0a1749b9e6690f87045
This will be mainly used by VCN management service which will
need to hold the networks but preserve the backgrounded-ness
of the networks.
Test: android.net.ConnectivityManagerTest#testRequestType
Test: android.net.cts.ConnectivityManagerTest#testRequestBackgroundNetwork /
--rerun-until-failure 100
Test: ConnectivityServiceTest#testBackgroundNetworks
Test: m -j doc-comment-check-docs
Bug: 175662146
Change-Id: I463c7a3139a286e50ea71e674060975ce228caa9
Instead of classifying interfaces by network type in BatteryStats,
classify them based on the transports array provided by the
NetworkAgent.
Network types are deprecated and transports should be used instead. This
change allows BatteryStats to stop depending on unstable APIs such as
isNetworkTypeMobile.
This change also updates nullability annotations in ConnectivityService
and NetworkAgentInfo to show that the NetworkCapabilities are non-null
(as provided by the network agent) when calling
noteNetworkInterfaceTransports.
Bug: 174436414
Test: atest
atest ConnectivityServiceTest#testBatteryStatsNetworkType \
--rerun-until-failure 40
Merged-In: I4e928fac8a57a9b1fc758a44af2a5719b8c871b8
Change-Id: I4e928fac8a57a9b1fc758a44af2a5719b8c871b8
Add new capability to indicate whether a network is
managed by Virtual Carrier Network (VCN). This is needed
to identify networks between VCN managed network and
others. And this capability will be:
1. mutable
2. requestable
3. set by default for network agents and requests
4. allowed for test networks
Note that this commit is identical to aosp/1529959 except the
capability remains hidden to address the javadoc problem first.
And this CL also needs to be bound with the counter part change
to prevent build breakage.
Test: 1. atest FrameworksNetTests CtsNetTestCases
2. adb shell dumpsys connectivity
3. atest ConnectivityServiceTest#testLoseMutableAndRequestableCaps
Bug: 175662146
Change-Id: I37a6f492c2aba72836e36851b50b67398f8bdd36
As a preparation of exposing system API. This patch does some
harmless refactoring, which includes:
1. Move VpnInfo to android.net
2. Add nullability annotations
3. Make members final
Bug: 174123988
Test: TH
Change-Id: I1530bb45d0e84c28c6deac33596bc686058afc0d
* Provide App Developers Qos related info associated to
a bound socket through ConnectivityManager
* Qos sessions are generated and filtered by Network Agents
and sent back through the Connectivity Service to the
API consumer.
* The structure of the code within com.android.server
is designed to support different types of filters in the
the future.
* The first type of Qos Attributes are related to EPS
Bearers in order support RCS.
Bug: 155176305
Test: Added to cts/NetworkAgentTest
Test: Added to ConnectivityServiceTest
Change-Id: I145dd065d9deeee449eb9695ab3f6c8556ee7c09
